Menu

MAINTENANCE SCHEDULE

Every 6 month or 60 hours

  1. Verify bearings for smoothness, assure they are free rolling with no roughness. Remove outer bearing seal, clean bearing and repack with Lucas Red & Tacky (Trademark) grease.
  2. Inspect rear shock for oil leaks (if applicable)

Every 12 months or 100 hours

  1. Verify bearings for smoothness, and replace if any roughness can be felt
  2. Remove and regrease upper shock hex pin with Lucas Red & Tacky grease

Every 18 months or 160 hours

  1. Verify bearings for smoothness, assure they are free rolling with no roughness. Remove outer bearing seal, clean bearing and repack with Lucas Red & Tacky (Trademark) grease
  2. Inspect rear shock for oil leaks (if applicable)
  3. Remove and inspect frame bolts for stress cracking. Replace bolts with blue loctite on the threads, Lucas red & Tacky grease on the shoulder, and Torque to manufactures specifications

TORQUE SPECS

Rogue Sixty, Rogue Forty & Evolution Convert

Seat Tube Pivot pins (x4): 27nM (20 ft lbs)
Shockstay pins (x4): 20 nM (15 ft lbs)
Shock mounting hardware: 14 nM (10 ft lbs)

Epiphany Convert

Seat Tube Pivot pins (x4): 27nM (20 ft lbs)
Shockstay pins (x4): 20 nM (15 ft lbs)
Shock mounting hardware: 14 nM (10 ft lbs)

Disclaimer: failure to follow and show proof of following maintenance schedule voids all manufactures warranty.