Epiphany Dropper Post Cable Install


Step: 1
Cable flows down seat tube, up the down tube and exits the internal porton the drive side of the head tube.

Step: 2
The bottom bracket has a hole to allow for easy finger access to the cable. You can start to route the cable from the seat tube or head tube. Use your finger inside the bottom bracket to help the cable flow around the bend of the downtube and seat tube.

Step: 3

To keep dropper post cable from rattling inside the frame use a rubble or foam cable sleeve of your choice.

Step: 4

The dropper post cable should exit the frame on the drive side out of one of the two holes at the head tube.