Dropper Post Cable Install Rogue Forty and Sixty

Step: 1
1. First step will be to install the dropper post so you can put the bike In the stand.
2. Remove the electronics den cover, this will allow you to get the cable up the seat tube and downtube.

Step: 2
This is what the cable will look like before it is pressed into the frame.

Step: 3

1. Dropper cable will exit the frame on the drive-side at the head tube.
2. Use your fingers inside the lower headtube opening to help fish the cable out of the hole.
3. Leave the cable housing in the frame till the rest of the bike is assembled so you know what length to cut the cable.