Menu

BEARING INSTALLATION

Bearing-2

Step: 1

Clean surface with alcohol to allow for a dirt and oil free bearing pocket.
Clean off metal surface of bearings with alcohol to remove any oil.

Bearing-3

Step: 2

Use Loctite 609 or any retaining compound in the bearing pocket.
Apply the retaining compound around the entire bearing pocket surface evenly.

Bearing-4

Step: 3

Press in bearings with bearing press

Bearing-5

Step: 4

Verify that the bearing is completely pressed in to the bearing pocket evenly without any gaps.
Install chainstay or rocker to frame after bearings are installed.