Rogue Sixty is a trail slayer Enduro machine featuring ACTIVE Energy Efficient Suspension (AEES); engineered to withstand the abuse of whatever you can possibly throw at it, and then some! With 160mm of front and rear travel, a 66° HTA, and absurdly short 420 mm (16.5”) chain stays, this machine will get as rowdy as you will dare to go on the descents. What sets the Rogue Sixty apart from other Enduro bikes is that once you get to the bottom, the lightweight chassis, 74° STA, and energy efficient 4-bar rear linkage allow you to quickly and efficiently tackle the climbs leaving your buddies in the dust. Go Rogue.
Hex Key Rocker Locker Proprietary shock pin and rocker interface with precision fit hex key interface to prevent unwanted torsion in the rear linkage.
Hex Taper Rear Axle Proprietary rear axle and derailleur hanger with precision fit hex key interface to prevent unwanted torsion in the rear linkage.
Dual Encapsulated Pivots Pivot clevis interface that holds the bearing in place from both sides for maximum lateral stiffness.
Internal Cable Routing Internal front triangle cable housings allow for ease of brake and derailleur cable routing. Just pick the correct port, close your eyes, and slide your cable right through the frame!
Internal Dropper Post Routing Internal cable routing accommodation for stealth dropper posts.
Di2 Drivetrain Integration Full internal cable routing and a down tube port with an injection molded cover/Di2 battery holder electronics den (e-den) ensures a clean, robust electronic drivetrain integration.
1. Head Angle (deg)
2. Seat Angle (deg)
3. Stack (mm)
4. Reach (mm)
5. Head Tube (mm)
6. Top Tube (mm)
7. Seat Tube (mm)
8. Standover (mm)
9. Front Center (mm)
10. Chainstay (mm)
11. BB Height (in)
12. Wheelbase (mm)
The Rogue frame geometry is sized according to published medical data on
anatomical proportions. This means that the frame sizes were designed to more accurately fit based on height and inseam dimensions, and deliver the best riding experience.